西門子7KM9300-0AE02-0AA0電能表PROFINET V3
交換式以太網 以太網 PROFINET V3，可插拔， 用于 7KM PAC3200 / 3220/ 4200 / 3VA COM100 / 800、
西門子代理商現貨供應
原裝正品 質保一年
上海斌勤電氣技術有限公司
發布人：康奎 （銷售經理）發布
本公司簽約正式的銷售合同，并開具13%的增-值-稅-發-票。
外地客戶統一采用快遞發貨,也支持上門提貨，貨物快遞到您手時候,一定要開箱檢驗!如有損壞,請拒絕簽收,并由快遞公司返回!
在你簽收后表示你對該貨物沒有異議!我們會給予您檢測時間,并請在貨物到給予確認,謝謝合作!
產品均為密封包裝，外包裝詳見產品圖片，白色標簽上均有產品訂貨號和產地，各位買家在收到貨后，請核對型號，無誤后再拆包裝、
本公司宗旨：本著以誠信為本，以顧客為中心.質量保證·服務誠信·價格實惠.
為用戶提供專業的自動化產品及服務！
相關西門子產品技術：
7KM9200-0AB00-0AA0
擴展模塊 4DI / 2DO， 可插拔，用于 7KM PAC3200/ 4200
7KM9200-0AD00-0AA0
擴展模塊 I（N）,I（Diff）,模擬 N 線 測量， 差動電流測量，2 模擬輸入端，可插拔，適用于 7KM PAC3200 / 4200
7KM9300-0AB01-0AA0
擴展模塊 PROFIBUS DP， 可插拔，用于 7KM PAC3200 / 3220 / 4200 / 3VA COM100 / 800
7KM9300-0AE01-0AA0
交換式以太網 PROFINET 擴展模塊，可插拔， 針對 7KM PAC3200 / 4200 / 3VA COM100 / 800
7KM PAC Expansion Modules and Accessories
訂貨數據 產品信息 組態工具
跳轉到
概述
更多信息
概述
Expansion modules and accessories for 7KM PAC measuring devices
Expansion modules are used as communication interfaces and for expanding the digital inputs/outputs for 7KM PAC measuring devices.
The expansion modules are plugged in at the back of the measuring device. The device identifies the module automatically and presents the relevant parameters for this module for selection in the parameterization menu.
The following expansion modules are available:
Expansion module I(N), I(Diff), analog
7KM PAC Switched Ethernet PROFINET expansion module
7KM PAC PROFIBUS DP expansion module
7KM PAC RS 485 expansion module
7KM PAC 4DI/2DO expansion module
Expansion module I(N), I(Diff), analog
The 7KM PAC I(N), I(Diff), Analog expansion module offers the following performance features for the 7KM PAC3200 and 7KM PAC4200 measuring devices:
N-conductor measurement (IN) Class 1 in accordance with IEC 61557-12
Residual current measurement (IDiff).
2 analog inputs for residual current (IDiff) temperature, flow, and pressure measurement, for example
Continuous monitoring to determine a gradual increase in leakage currents and thus a possibility of reducing costs by preventing disconnection in the case of a BGV A3 test (with summation current transformers TYPE A or TYPE B measurement)
They provide an expansion option for existing devices and systems at any time.
Connection for 3VA molded case circuit breaker
The following expansion modules can also be mounted on the front of the COM800/COM100 breaker data servers of the 3VA molded case circuit breaker:
7KM PAC Switched Ethernet PROFINET and
7KM PAC PROFIBUS DP
For further details on this see Low-voltage components > SENTRON protection, switching, measuring and monitoring devices > Protection devices > Molded case circuit breakers > 3VA molded case circuit breaker
or refer to the Manual at
http://support.automation.siemens.com/DE/view/en/90318775
7KM PAC Switched Ethernet PROFINET expansion module
The 7KM PAC Switched Ethernet PROFINET expansion module is a plug-in communication module for 7KM PAC3200 and 7KM PAC4200 measuring devices and 3VA molded case circuit breakers.
It provides the following features:
Standardized PROFIenergy interface to the measured variables
The measured variables can be individually selected using a GSDML file. This permits use of cost-effective S7 CPUs
Easy parameter assignment using the device display and STEP 7
Integrated Ethernet switching allows networking with short cables without additional switches.
Direct integration in production machine networks using IRT (IRT = Isochronous-Real-Time)
Full support of PROFINET IO (DHC, DNS, SNMP, SNTP)
Device replacement without PG in the PROFINET assembly using LLDP
Deterministic reversing time through ring redundancy (MRP)
Modbus TCP communication
Communication with powermanager or powerconfig
2 x Ethernet (RJ45) sockets
Baud rates 10 and 100 Mbit/s.
PROFINET IO, PROFIenergy and Modbus TCP protocols
No external auxiliary power necessary
Additional display via the device display and via LEDs on the module
All measured variables from 7KM PAC3200 and 7KM PAC4200 can be individually selected and cyclically transmitted by means of the GSDML file. This enables optimum use of the process image of the PROFINET controller, e.g. CPU 315-2 PN/DP of SIMATIC S7.
The measured variables can be read out in acyclic mode using PROFIenergy, a PNO protocol profile. Thanks to PROFIenergy, it is possible to assemble a power monitoring system with devices from various manufacturers using PROFINET.
7KM PAC PROFIBUS DP expansion module
The 7KM PAC PROFIBUS DP expansion module is a plug-in communication module for 7KM PAC3200 and 7KM PAC4200 measuring devices and 3VA molded case circuit breakers.
The 7KM PAC PROFIBUS DP expansion module has the following features:
Plug-in communication module for measuring devices for connection to PROFIBUS DPV1
Can be configured locally from the front of the device or using parameterization software
Using PROFIBUS DPV1, data can be transferred in both cyclic and acyclic modes
Easy engineering thanks to integration in SIMATIC STEP 7 and/or simple integration via GSD file for other programming systems
Optimum use of process image of a control system for selection of individual measured quantities for cyclical transfer
All baud rates from 9.6 kbit/s up to 12 Mbit/s are supported
Connection through 9-pole Sub-D connector according to IEC 61158
No external auxiliary power necessary
Additional display via the device display and via LEDs on the module
7KM PAC RS 485 expansion module
The 7KM PAC RS 485 expansion module has the following features:
Plug-in 7KM PAC RS485 communication module for 7KM PAC3200 and 7KM PAC4200 measuring devices
Can be configured locally from the front of the device or using parameterization software
Support for the Modbus RTU protocol
Plug and play
Baud rates 4.8/9.6/19.2 and 38.4 kbit/s are supported
Connection by means of 6-pole screw terminals
No external auxiliary power necessary
Status indication by LED on the module
The 7KM PAC RS 485 expansion module is required for the gateway function of the 7KM PAC4200 for communication with simple devices with RS 485 interface, such as the 7KM PAC3100, via Ethernet (Modbus TCP).
7KM PAC 4DI/2DO expansion module
The 7KM PAC 4DI/2DO expansion module is used to expand the 7KM PAC4200 measuring device to up to 10 digital inputs and 6 digital outputs and offers the following features.
Up to two 7KM PAC 4DI/2DO modules can be plugged onto a 7KM PAC4200.
The 7KM PAC 4DI/2DO expansion modules mean that the internal digital inputs and outputs can be expanded by up to 8 inputs and 4 outputs.
The 7KM PAC 4DI/2DO expansion modules can be configured locally at the front of the device or via the powerconfig parameterization software
The digital inputs can be used without the need for an external power supply as they are self-powered. This is particularly useful for the integration of non-electric measuring devices, such as water or compressed-air counters
All functions of the integrated multifunctional inputs/outputs on the 7KM PAC4200 are also available in the 7KM PAC 4DI/2DO expansion module
Inputs and outputs can be used as an S0 interface conforming to IEC 62053-31
The connection is made via a 9-pole screw terminal
No external auxiliary power supply is required