technica-engineering TE-1400-1 1000BASE-T1 EMC 媒體轉換器 車身控制模塊
品牌：technica-engineering
型號：TE-1400-1

來自德國的Technica Engineering是汽車以太網集成的先驅，自2008年成立以來，十多年間一直致力于開發汽車以太網解決方案， 塑造汽車的未來。我們率先在市場上開發了100BASE-T1和1000BASE-T1的Media Converter產品，并且陸續推出了Capture Modules, Media Gateway， 以及從2021年研發的具有AVB功能的增強型以太網交換機。目前Technica是多所世*先的OEMs和Tier-1s信賴的工程和測試合作伙伴， 其創新的汽車以太網硬件和軟件解決方案使客戶可以廣泛而高效地測試現代車載電子元件和網絡。 technica-engineering 我們創新的硬件和軟件解決方案允許我們的客戶在開發過程中廣泛有效地測試現代車載電子元件和網絡。復雜ecu的測試，開發自己的產品和工具，我們的顧問和經理團隊提供全面咨詢，車輛整個E/E的復雜解決方案（系統工程）。

1000BASE-T1 EMC產品詳情：
Converts Automotive Gigabit Ethernet: 1000BASE-T1 (1000 MBit/s full duplex, 1x single twisted pair (STP)) to Standard Gigabit Ethernet (SFP)
Master/slave configuration
SFP Module allows optical Ethernet connection or standard Gigabit Ethernet through RJ45 Connector
Allows to perform EMC test through the optical interface
Stainless steel housing
Status LEDs
Configuration DIP switches
Automotive MateNET connector and cables included (Power, 1000BASE-T1)
Size: 95 x 95 x 32mm

其它相關產品：

100BASE-T1 BCM The ideal physical layer conversion between Automotive Ethernet and your PC system.
100BASE-T1 NXP The ideal physical layer conversion between Automotive Ethernet and your PC system.
100BASE-T1 USB The most compact and practical interface to your 100BASE-T1 device.
100BASE-T1 SFP Module Convert between 100BASE-T1 and Standard Ethernet
1000BASE-T1 The ideal physical layer conversion between Automotive Gigabit Ethernet and your PC system
100/1000BASE-T1 MATEnet Connector The new generation of conversion between Automotive Ethernet and your PC system
100/1000BASE-T1 H-MTD Connector The new generation of physical layer conversion between Automotive Ethernet and your PC.
1000BASE-T1 EMC The ideal solution for working quickly and efficiently with 100/1000BASE-T1 EMC
1000BASE-T1 SFP Module Convert between 1000BASE-T1 (automotive Gigabit Ethernet) and SGMII Interface.
Universal   EMC Device The swith-based development platform for EMC evaluation with Automotive Ethernet
MediaGateway   The development tool for testing and analysing on-board vehicle networks
CM LIN Combo   Capture your LIN and analogue signals in the car via an Ethernet uplink
CM CAN Combo   Capture your CAN(-FD), FlexRay and RS-232 traffic in the car via an Ethernet uplink
CM Ethernet    Combo Capture both 100BASE-T1 and 1000BASE-T1 without interfering the original network
CM 100 High    Capture your 100BASE-T1 traffic in the car without interfering the original network.
CM 1000 High   Capture your Automotive Gigabit Ethernet traffic without interfering the original network
ANDi tool      The simple test and simulation environment for Ethernet controllers and bus systems.
BTS - BODY ELECTRONIC TEST SYSTEM    The highly scalable HIL test system for automated validation of body ECUs