德國uv-technik TEP 20-S 用于紫外燈的固態電源，步距較小，可調范圍為3002,000 W.

特殊優勢：
①通用，額定功率等級約為3002,000 W，這意味著紫外線燈在以上命名的權力等級
②燈泡采用矩形電流操作，不會出現暗區更少且快速調節UV燈功率，例如，少走一步根據印刷機的速度調節紫外線功率;或停止過程（例如快速功率脈沖）;或調整uvpower根據老齡化。
③根據功率設置恒定功率UV燈輸出
④不受電源電壓波動的影響
⑤廣泛的電壓范圍為196249V，50和60Hz，而不會對TEP 20-S進行任何更改
⑥功率因數校正，PF =約。 0.99; THDi = ~3％
⑦由DC 0 ... 10 V控制輸出具有接地故障，過載和短路保護;
⑧通過更換觸點和三色LED進行狀態監控
⑨易于安裝，所需布線更少
⑩符合DIN VDE 0160和其他歐洲和世界范圍的標準（IEC）
CE標志

TEP 20-S

Power output approx. 300 – 2,000 W
step less adjustable
Mains voltage 196 to 249 V
Mains current (2300 W) 12 to 9.5 A (PF = 0.99)
Power Factor / THDi 0,99 / 4,0 % at 2000 W
Mains frequency 50 and 60 Hz
Mains connection L, N, PE
Typical lamp arc length 5 to 45 cm (2” to 17”)
Lamp operating voltage 100 to 300 V 1)
Lamp operating current up to 14 A
Duty frequency approx. 55 Hz
Power loss approx. 15 %
Dimensions, approx.
(WxHxL)
255 x 123 x 325 mm
Weight 4.9 kg
Cooling of the unit Internal
Operating temperature 0 to 40° C
Analogous power control input DC0...10 V: DC 0...0.5 V = for lamp OFF
DC 1...10 V = for lamp power approx. 10-
Analogous power control input DC4...20 mA: DC 4...5.6 mA = for lamp OFF
DC 5,6...20 mA = for lamp power approx. 10-
EMC according to EN 55011, group I, class A (Industrial areas)